How Is Footwear Abrasion Resistance Tested?
An outsole experiences repeated contact with floors, pavement, and other surfaces during everyday use. Over time, this contact can remove material, reduce outsole thickness, and wear down tread features. A footwear abrasion resistance test helps manufacturers evaluate how well outsole materials withstand this type of mechanical wear under controlled conditions.
Several methods are available, and they do not all test materials in the same way. Some use a rotating abrasive drum to evaluate a prepared specimen, while others reproduce aspects of the walking action on a complete sole. Understanding the differences helps footwear manufacturers select suitable tests, compare materials, and establish quality requirements.
What Is Footwear Abrasion Resistance?
Footwear abrasion resistance refers to an outsole material’s ability to resist material loss when it repeatedly rubs against an abrasive surface. This wear can gradually change the outsole’s thickness, surface texture, and tread geometry.
The extent of abrasion depends on several factors, including material composition, surface contact, applied force, and the nature of the abrasive surface. As a result, two outsoles made from the same general material may produce different test results.
Abrasion resistance is also different from other footwear performance properties:
- Abrasion resistance measures material loss caused by rubbing or abrasive contact.
- Slip resistance evaluates frictional performance between footwear and a floor.
- Flex resistance evaluates how a material or shoe withstands repeated bending.
- Tear resistance measures resistance to the initiation or propagation of a tear.
These properties address different types of stress. An outsole with good abrasion resistance does not automatically provide strong slip resistance or excellent flex durability.
Why Is Outsole Abrasion Resistance Important?
Outsole abrasion testing gives manufacturers useful information about material wear under defined conditions. It supports product development and quality control in several ways.
Comparing outsole materials: Manufacturers can evaluate different rubber, EVA, PVC, and other polymer formulations using the same test method. This helps product developers compare potential materials before selecting one for a particular footwear application.
Checking production consistency: Testing representative samples from different production batches can help identify changes in material performance. Unexpected differences may justify further investigation into material selection, formulation, or manufacturing consistency.
Supporting material selection: A lightweight or flexible material may suit one footwear design, while another application may require greater resistance to surface wear. Abrasion results provide one part of the information needed to make that decision.
Monitoring outsole wear: Excessive material loss can affect outsole thickness and tread features. These changes may influence how the outsole performs as it wears, although abrasion results alone cannot establish its overall service life.
Laboratory results describe performance under specific test conditions. They cannot reliably predict how many months or years a pair of shoes will last because real-world wear also depends on walking patterns, user weight, surfaces, environment, and frequency of use.
Manufacturers can include abrasion testing in a broader footwear quality control program alongside other relevant product checks.
How Is a Footwear Abrasion Resistance Test Performed?
The exact procedure depends on the selected standard or test method. However, most material-level abrasion tests follow a similar general principle: expose a prepared specimen to controlled abrasive contact, then measure the resulting material loss.
A typical testing sequence includes these stages:
- Select a representative specimen. The laboratory takes a sample from an outsole, sole unit, or suitable soling material. The specimen must match the requirements of the selected method.
- Prepare and condition the sample. The operator prepares the specimen and conditions it as the method specifies. Sample dimensions and surface preparation can affect the result.
- Record initial measurements. Depending on the procedure, the laboratory records the specimen’s initial mass, dimensions, density, or thickness.
- Apply controlled abrasion. The machine brings the specimen into contact with a specified abrasive surface under defined conditions.
- Complete the test cycle. The machine applies the required movement, force, and test duration or cycle sequence.
- Measure material loss. The operator checks the specimen after abrasion and determines mass loss, volume loss, thickness loss, or another specified result.
- Record and interpret the findings. The report identifies the method, test conditions, measurements, and relevant observations.
These steps provide a general overview, not a universal procedure. Specimen geometry, abrasive material, applied force, movement, and measurement methods differ between standards. For consistent comparisons, laboratories must follow the selected method rather than combine procedures from different tests.
Footwear Abrasion Resistance Testing Standards
Three useful references for outsole abrasion evaluation are ISO 20871:2018, SATRA TM174, and SATRA TM362. Although all address abrasion, their test arrangements and specimen requirements differ.
ISO 20871:2018 – Abrasion Resistance of Outsoles
ISO 20871:2018 – Footwear: Test Methods for Outsoles – Abrasion Resistance specifies a method for determining the abrasion resistance of footwear outsoles, regardless of material. ISO currently lists the 2018 edition as confirmed and current.
The method provides a standardized way to assess how outsole material responds to abrasive contact. Its scope makes it relevant to different outsole materials rather than limiting the test to one polymer family.
Results can be expressed through measurements such as relative mass loss and relative volume loss. These measures describe material removed during abrasion, but they represent different quantities.
- Mass loss describes the reduction in specimen mass after testing.
- Volume loss describes the volume of material removed.
- Relative results allow the measured loss to be expressed in relation to the applicable reference or calculation basis specified by the method.
Material density matters when a laboratory converts mass loss into volume loss. For the same mass reduction, a lower-density material represents a greater volume of removed material than a higher-density material. Therefore, mass-loss values alone may not provide a fair comparison between materials with substantially different densities.
The laboratory must follow the standard’s requirements for specimen preparation, abrasive conditions, and result calculation. Product acceptance criteria should come from the buyer’s specification or the applicable product requirements. ISO 20871 does not establish one universal abrasion limit for every type of footwear.
SATRA TM174 – Abrasion Resistance: Rotating Drum Method
SATRA TM174 – Abrasion Resistance: Rotating Drum Method evaluates the abrasion resistance of a material. SATRA identifies polymeric footwear soling materials and suitable samples cut from finished soles as its main applications. The method can also apply to other polymer-based sheet materials.
The test uses a circular specimen held against a rotating cylinder covered with standard abrasive cloth. A controlled force keeps the specimen in contact with the abrasive surface. As the specimen moves along the cylinder, it follows a helical contact path.
After abrasion, the laboratory determines the specimen’s volume loss through one of two approaches:
- Divide the measured mass loss by the specimen’s average density.
- Measure the change in displacement volume.
The method also includes a check of abrasive severity using a reference material. This helps control the abrasive conditions used during testing.
TM174 is primarily a material-specimen test. It does not reproduce a complete walking cycle on a finished shoe. Instead, it provides a controlled way to evaluate the abrasion behavior of suitable soling materials.
SATRA lists applications for polyurethane, PVC, thermoplastic materials, rubber, and EVA solings. The suitability of a particular specimen still depends on the method’s requirements.
SATRA TM362 – Abrasion Resistance of Soles: Biomechanical Method
SATRA TM362 – Abrasion Resistance of Soles: Biomechanical Method uses a different approach. Rather than relying on a specimen pressed against a rotating drum, it evaluates sole abrasion through a biomechanically realistic cyclic walking action.
The method mounts the footwear or soling material on a foot form, which attaches to the leg of a walking machine. The assembly repeatedly contacts an abrasive paving surface. During testing, the surface rotates incrementally while the forepart of the sole remains in contact.
The laboratory can assess the resulting wear qualitatively or measure mass loss, thickness loss, or both.
SATRA states that TM362 applies to footwear soles with an effective heel height of up to 25 mm. It covers soles on most types of complete footwear and can also evaluate molded sole units or sheet soling material.
The main difference between TM362 and TM174 is the test action. TM174 uses a rotating drum and prepared material specimen, whereas TM362 uses a simulated walking movement against an abrasive paving surface. The two methods therefore provide different types of information and should not be treated as interchangeable.
What Equipment Is Used for Outsole Abrasion Testing?
Equipment depends on the selected method and specimen type. A laboratory may use several of the following items:
- Rotating drum abrasion tester: Holds and moves a material specimen against a rotating abrasive cylinder.
- Abrasive cloth or surface: Provides the specified abrasive contact for the test.
- Specimen holder and loading mechanism: Maintains the required specimen position and applied force.
- Biomechanical walking abrasion tester: Reproduces the cyclic walking action used in methods such as SATRA TM362.
- Precision balance: Measures specimen mass before and after testing.
- Thickness and dimensional measuring tools: Record changes in specimen or outsole dimensions.
A rotating drum tester and a biomechanical walking abrasion machine serve different purposes. The laboratory must choose equipment that matches the test method rather than assume one machine can reproduce every abrasion procedure.
For a broader overview of footwear testing approaches, see FUYU’s guide to footwear testing methods.
How Are Footwear Abrasion Test Results Measured and Interpreted?
Abrasion test reports may include several measurements. The correct interpretation depends on the method and the type of specimen.
Mass Loss
Mass loss is the difference between the specimen’s initial mass and its mass after abrasion. Laboratories commonly express this result in milligrams or grams, depending on the specimen and procedure.
A smaller mass reduction generally indicates less material removal under the same test conditions. However, mass loss alone does not account for differences in material density.
Volume Loss
Volume loss describes the amount of material removed during abrasion. A laboratory may calculate it from mass loss and material density or determine it through an appropriate displacement measurement.
Volume loss is often expressed in cubic millimeters. It can help compare materials with different densities, provided the laboratory uses a consistent test method and calculation basis.
Thickness Loss
Thickness loss measures the reduction in specimen or outsole thickness after testing. This measurement can help describe how abrasion affects the physical profile of a sole.
It is particularly relevant when a method evaluates wear on sole units or complete footwear. However, thickness loss at one location does not necessarily represent wear across the entire outsole.
Comparing Results Fairly
Lower material loss generally indicates better abrasion resistance when laboratories use comparable conditions. Before comparing two results, check:
- Whether both laboratories used the same test method and edition.
- Whether the specimens had comparable dimensions and preparation.
- Whether the abrasive surface and test conditions matched.
- Whether the report uses mass loss, volume loss, or thickness loss.
- Whether the same calculation and reference basis applies.
A result from a rotating drum test should not be directly compared with one from a biomechanical walking test. The different contact arrangements produce different testing conditions.
What Factors Affect Outsole Abrasion Resistance?
Several material and design factors influence how an outsole responds to abrasive contact.
Material composition: Rubber, EVA, PVC, and other polymer formulations have different structures and mechanical behaviors. Even within one material category, formulation differences can produce different abrasion results.
Density and material structure: Density affects the relationship between mass loss and volume loss. However, density alone cannot determine whether an outsole will resist abrasion well. Cellular structure and other material characteristics also matter.
Hardness: Hardness describes resistance to indentation under a defined measurement method. It can influence wear behavior, but a harder outsole does not automatically have better abrasion resistance.
Outsole design: Tread geometry, contact area, and local thickness affect how the outsole meets the ground. Different areas may experience different wear patterns during use.
Manufacturing consistency: Variations in material preparation, formulation, or production can affect the properties of finished sole components. Consistent production helps manufacturers maintain more predictable product characteristics.
Test conditions: Abrasive type, applied force, movement, and test duration all influence measured material loss. This is why laboratories must report the method and conditions alongside the results.
For more information about material-level performance, see FUYU’s guide to footwear material testing.
Abrasion Resistance of EVA, Rubber, and PVC Outsoles
EVA, rubber, and PVC are used in different types of footwear, but their abrasion performance cannot be determined from the material name alone.
Rubber outsoles: Different rubber compounds can provide different levels of wear resistance. A high-abrasion rubber outsole may suit applications that place greater emphasis on resistance to material loss, but not every rubber formulation delivers the same performance.
EVA outsoles: EVA footwear materials vary in density, hardness, formulation, and cellular structure. These differences can influence abrasion behavior. A material’s lightweight feel or cushioning does not establish its abrasion resistance. Manufacturers should evaluate the actual material or finished sole using an appropriate method. See EVA sole material and EVA foam mechanical properties for related material information.
PVC outsoles: PVC formulations and construction also vary. Their abrasion performance depends on the specific material and product design, so manufacturers should avoid assuming that all PVC soles behave alike.
Material selection involves more than wear resistance. Weight, flexibility, cushioning, cost, product construction, and intended use also influence the final choice.
For FUYU Footwear, these considerations are relevant to the development and production of EVA slippers, EVA sandals, garden shoes, and PVC slippers. Established in 2007 in Jinjiang, Fujian, FUYU provides OEM and ODM footwear manufacturing services. The appropriate material and outsole construction depend on each product’s design requirements and intended application.
Abrasion Resistance Testing vs. Other Footwear Tests
Abrasion testing addresses one specific type of material wear. Other footwear tests evaluate different performance characteristics.
| Test | What It Evaluates |
|---|---|
| Sole abrasion testing | Material loss caused by abrasive contact |
| Whole shoe flexing test | Damage caused by repeated bending of complete footwear |
| Outsole flex resistance or cut-growth testing | Crack development or growth during repeated flexing |
| Slip resistance testing | Frictional performance between footwear and a test surface |
| Sole adhesion testing | Bond strength between the upper and sole or between sole layers |
These tests complement one another, but they are not substitutes. A good abrasion result does not establish strong sole adhesion, reliable slip resistance, or resistance to flex cracking. Manufacturers should select tests according to the product’s construction, intended use, and buyer requirements.
Frequently Asked Questions
1. What is an abrasion test for footwear?
A footwear abrasion test evaluates how much material an outsole or sole specimen loses when it contacts an abrasive surface under controlled conditions. The result helps manufacturers assess outsole wear resistance and compare materials.
2. How do you test the abrasion resistance of a shoe sole?
The laboratory selects and prepares a specimen according to a defined method. It then applies controlled abrasive contact and measures material loss. Depending on the method, the test may use a rotating drum or a biomechanical walking action.
3. What is ISO 20871 used for?
ISO 20871:2018 specifies a method for determining the abrasion resistance of footwear outsoles, irrespective of material. It provides a standardized basis for evaluating outsole wear under controlled test conditions.
4. What is the difference between SATRA TM174 and SATRA TM362?
SATRA TM174 uses a circular material specimen that contacts a rotating abrasive drum. SATRA TM362 uses a biomechanical walking action against an abrasive paving surface and can evaluate complete footwear soles, molded sole units, or sheet soling material within its stated scope.
5. Does higher outsole hardness always mean better abrasion resistance?
No. Hardness and abrasion resistance measure different properties. A harder material does not automatically lose less material during abrasion testing. Manufacturers should evaluate wear resistance through a suitable abrasion test.
6. Is rubber more abrasion-resistant than EVA?
Not in every case. Rubber and EVA formulations vary, and their abrasion performance depends on material composition, structure, and test conditions. A direct comparison requires suitable specimens tested using the same method.
7. Does an abrasion test predict how long a shoe will last?
No. An abrasion test measures wear under specified laboratory conditions. Actual footwear lifespan also depends on walking patterns, surface conditions, frequency of use, footwear construction, and other factors.
Conclusion
Outsole abrasion resistance is an important part of footwear material evaluation, but the test method determines what the results can tell manufacturers. ISO 20871 provides a standardized outsole abrasion method, SATRA TM174 evaluates material specimens through rotating drum abrasion, and SATRA TM362 uses a biomechanical walking action to assess sole wear.
For footwear manufacturers and buyers, the key is to select a method that matches the product and interpret results under consistent conditions. FUYU Footwear applies material selection and product quality considerations across its EVA slippers, EVA sandals, garden shoes, and PVC slippers, supporting OEM and ODM projects for international customers.
