What Is Color Fastness Testing in Footwear?
Footwear materials can encounter friction, daylight, moisture, and perspiration during storage and everyday use. These conditions may cause fading, discoloration, or color transfer, especially when colored materials do not maintain adequate color stability.
Footwear color fastness testing helps manufacturers evaluate how well different materials retain their original color or resist transferring color to adjacent surfaces. The appropriate test depends on the material and the exposure being assessed. For example, a rubbing test evaluates color transfer during contact, while a light fastness test examines fading under artificial light.
Understanding these differences helps footwear manufacturers select suitable tests, assess material quality, and establish product requirements.
What Does Color Fastness Mean in Footwear?
Color fastness describes a material’s ability to retain its color or resist color transfer when exposed to specific conditions. In footwear, this property matters for uppers, linings, insocks, textile components, leather, coated materials, and colored polymer parts.
Several related terms describe different appearance changes:
- Fading: A reduction in color intensity, often caused by light exposure or other environmental conditions.
- Discoloration: A change in the original shade or appearance of a material.
- Bleeding: The release or migration of color from a material when exposed to water or another liquid.
- Color transfer: The movement of color from one surface to another through rubbing or contact.
Two important concepts appear in color fastness reports:
Color change describes a difference between the tested material’s original color and its appearance after testing.
Color staining describes color transferred from the tested material onto another material, such as a rubbing cloth or adjacent fabric.
These results do not measure the same thing. A material may show little visible color change but still transfer noticeable color to another surface.
Color fastness is also not one universal property. A material may perform well in dry rubbing but respond differently to wet rubbing, perspiration, or light exposure. Manufacturers should therefore select tests according to the material and its intended use.
Why Is Color Fastness Testing Important for Footwear?
Color fastness affects both product appearance and the interaction between footwear components and other surfaces. Testing helps manufacturers identify potential problems before materials enter production or finished products reach buyers.
Reducing color transfer: Rubbing tests help evaluate whether colored uppers, linings, or other components may transfer color during contact. This matters when footwear materials touch socks, skin, or adjacent components.
Evaluating resistance to fading: Light fastness testing helps assess how colored materials respond to artificial light exposure. It can support material selection for footwear that may encounter daylight during use, display, or storage.
Checking water and perspiration resistance: Moisture can cause color migration in certain materials. Testing helps assess whether water or artificial perspiration may lead to bleeding or staining.
Supporting incoming material inspection: Manufacturers can use test requirements to evaluate colored materials before production and identify inconsistencies between batches.
Improving quality control: Test results provide documented information for material approval, supplier evaluation, and product quality decisions. They can also help teams investigate appearance-related complaints.
However, no single test guarantees that a footwear material will retain its original appearance under every real-world condition. Laboratory results apply to the method and exposure conditions used. Manufacturers should consider them alongside other relevant footwear quality control procedures.
What Are the Main Types of Footwear Color Fastness Tests?
Different tests reproduce different exposure conditions. The main categories include rubbing fastness, light fastness, and color fastness to water or perspiration.
Color Fastness to Rubbing (Crocking Test)
A crocking test evaluates how much surface color transfers from one material to another during rubbing. It typically uses a specimen and a clean, undyed rubbing material under controlled contact conditions.
Depending on the method, the rubbing material may be cotton cloth or wool felt. The machine applies a defined rubbing movement and contact force.
Common test conditions include:
- Dry rubbing: Evaluates color transfer when the rubbing material remains dry.
- Wet rubbing: Evaluates transfer when the rubbing material is damp or prepared according to the method.
- Perspiration rubbing: Uses an artificial perspiration condition in methods that include this variant.
After the specified rubbing cycles, the laboratory examines the rubbing material for staining. Some methods also assess visible surface damage, such as marring or changes to the material’s finish.
Crocking tests are relevant to footwear uppers, linings, leather, textiles, and coated materials. They help assess whether color may transfer when materials rub against socks, skin, or other surfaces.
A crocking test is not the same as an outsole abrasion resistance test. Crocking evaluates color transfer and, in some methods, surface appearance. Abrasion testing measures material wear or material loss caused by abrasive contact.
Color Fastness to Light
Color fastness to light measures how well a material retains its color when exposed to artificial light. The purpose is to evaluate fading or color change under controlled exposure conditions.
Relevant methods use a xenon arc lamp to produce light that represents aspects of natural daylight. The laboratory exposes test specimens under specified conditions and compares their color changes with reference materials.
Some methods use Blue Wool reference fabrics. These references have different known levels of light fastness and help the laboratory assess the specimen’s fading response.
Light fastness testing can be relevant to colored footwear materials that may encounter daylight during use, retail display, or storage. However, accelerated laboratory exposure does not translate directly into a guaranteed number of months or years of outdoor use.
Color Fastness to Water and Perspiration
Water and perspiration can cause dyes or other colorants to migrate from certain materials. This may result in color bleeding or staining on adjacent materials.
Testing can evaluate how a specimen responds to:
- Distilled or deionized water.
- Artificial alkaline perspiration.
- Artificial acid perspiration.
Depending on the method, the specimen may contact a standard multifiber fabric during exposure. After testing, the laboratory assesses color change in the original specimen and staining on the adjacent fabric.
These tests are particularly relevant to footwear linings, insocks, and upper materials that may come into contact with moisture or perspiration. They help manufacturers evaluate potential color migration under defined conditions.
Footwear Color Fastness Testing Standards and Methods
Several ISO and SATRA methods address color fastness in footwear materials. Their scopes differ, so manufacturers should select a method that matches the material, test objective, and buyer requirements.
ISO 17700:2019 – Color Fastness to Rubbing and Bleeding
ISO 17700:2019 – Footwear: Test Methods for Upper Components and Insocks – Colour Fastness to Rubbing and Bleeding is a footwear-specific standard covering rubbing fastness and color bleeding.
It specifies four methods:
- Method A: To-and-fro square rubbing finger fastness testing machine.
- Method B: Rotative rub fastness testing machine.
- Method C: To-and-fro circular rubbing finger fastness testing machine.
- Method D: Color fastness to bleeding.
Methods A, B, and C assess the transfer of surface color during dry or wet rubbing. Method D evaluates the likelihood of color bleeding.
The methods apply to footwear uppers, linings, and insocks regardless of material. Method D also applies to sewing threads and shoelaces.
This scope makes ISO 17700 particularly relevant to footwear material evaluation. However, it is not a general light fastness standard, nor does it cover every possible component or performance property of a complete shoe.
ISO 105-B02:2014 – Color Fastness to Artificial Light
ISO 105-B02:2014 – Textiles: Color Fastness to Artificial Light specifies a method for evaluating the effect of artificial light representative of natural daylight on textile colors.
The method uses a xenon arc fading lamp and Blue Wool reference materials. Laboratories expose textile specimens and reference fabrics under controlled conditions, then assess the color change after exposure.
Although ISO 105-B02 is a textile standard rather than a footwear-specific standard, it can be relevant to textile uppers, linings, and other footwear components made from textile materials. Its use should align with the applicable footwear material specification or buyer requirement.
ISO currently lists the 2014 edition as confirmed following its 2025 review. A replacement work item, ISO/AWI 105-B02, is under development. The draft is not yet a published replacement standard.
SATRA TM8 – Color Fastness to Circular Rubbing
SATRA TM8 – Colour Fastness to Circular Rubbing evaluates surface damage and color transfer during mild dry or wet circular rubbing.
The method uses a rotating circular wool felt pad that rubs against the specimen under a constant contact force. After the specified number of revolutions, the laboratory assesses:
- Visible damage or marring on the specimen.
- Color or finish transferred to the felt pad.
The assessment uses a geometric grey scale.
SATRA TM8 mainly applies to footwear upper materials, but it can also evaluate colored leather, plastics, and textiles. It is useful when the test needs to consider both surface appearance and color transfer during circular rubbing.
SATRA TM167 and TM173 – Color Fastness to Rubbing
SATRA TM167 and TM173 both evaluate color transfer during rubbing, but they use different rubbing materials and test configurations.
SATRA TM167 – Crockmeter Test
SATRA TM167 – Colour Fastness to Rubbing: Crockmeter Test uses an undyed cotton cloth to assess surface color transfer.
The machine moves the cloth linearly backward and forward over the specimen under a constant contact force. After a defined number of rubbing cycles, the laboratory evaluates staining on the cotton cloth using a grey scale.
The method mainly applies to fabrics, leather, yarns, and sewing threads, but it can also assess other colored sheet materials. It is relevant to footwear uppers and linings made from suitable materials.
SATRA TM173 – Reciprocating Method
SATRA TM173 – Colour Fastness to Rubbing: Reciprocating Method uses a dry or wet wool felt pad that moves linearly backward and forward over the specimen.
The method evaluates surface damage and/or color transfer after a defined number of rubbing cycles. The laboratory assesses the results using a geometric grey scale.
TM173 includes four test variants:
- Dry rubbing.
- Wet rubbing.
- Perspiration rubbing.
- White spirit rubbing.
The method mainly applies to leather, although it can also evaluate plastics and textiles.
The key difference is the rubbing material: TM167 uses undyed cotton cloth, while TM173 uses wool felt. Their test configurations and assessment objectives should not be treated as identical.
SATRA TM160 – Color Fastness to Light from a Xenon Arc
SATRA TM160 – Colour Fastness to Light from a Xenon Arc evaluates a material’s resistance to color fading under artificial light.
The method exposes part of a test specimen and a series of Blue Wool reference fabrics to high-intensity xenon arc light. The light source approximates natural daylight through window glass, but at a higher intensity.
The laboratory controls the exposure environment, including temperature and humidity, because these conditions can influence fading. After exposure, it assesses the specimen’s color change against the reference fabrics.
SATRA TM160 applies to all types of footwear materials according to its stated scope. It can therefore support the evaluation of colored materials beyond textile components.
SATRA TM335 – Color Fastness to Water or Perspiration
SATRA TM335 – Colour Fastness to Water or Perspiration evaluates the likelihood of color bleeding when a material contacts water or artificial perspiration.
The method places a test specimen in contact with a standard multifiber fabric. Depending on the selected test condition, the assembly is soaked in:
- Distilled or deionized water.
- An alkaline artificial perspiration solution.
- An acid artificial perspiration solution.
The assembly is then placed between glass surfaces under specified pressure and stored in a warm environment for a defined period. After exposure, the laboratory dries the specimen and multifiber fabric separately and assesses color change and staining using grey scales.
TM335 applies to different material types, particularly materials used in footwear uppers and clothing. It can help evaluate the risk of color bleeding in footwear materials exposed to moisture or perspiration.
For an overview of SATRA’s discolouration-related methods, see its footwear color fastness test method directory.
What Equipment Is Used for Footwear Color Fastness Testing?
The required equipment depends on the test method and the material under evaluation. A laboratory may use the following equipment and test materials:
- Crockmeter: Applies a controlled back-and-forth rubbing action for methods such as SATRA TM167.
- Circular rubbing tester: Produces circular rubbing movement for methods such as SATRA TM8.
- Reciprocating rubbing tester: Moves a rubbing pad linearly across a specimen for methods such as SATRA TM173.
- Xenon arc light fastness tester: Exposes specimens to controlled artificial light for methods such as ISO 105-B02 and SATRA TM160.
- Rubbing cloths and wool felt pads: Provide the specified contact material for rubbing tests.
- Multifiber adjacent fabric: Provides a standardized contact material for applicable water and perspiration tests.
- Grey scales: Help assess color change and staining in applicable methods.
- Blue Wool references: Provide comparative references for applicable light fastness tests.
Conditioning and specimen preparation equipment may also be necessary to meet the selected method’s requirements.
Not every test uses the same equipment or reference materials. For example, a xenon arc tester evaluates light exposure, while a crockmeter evaluates color transfer during rubbing. Laboratories must use the equipment and materials specified by the relevant method.
For related information, see FUYU’s guide to footwear testing methods.
How Are Color Fastness Test Results Evaluated?
Color fastness results describe how a specimen responds to a particular test condition. The laboratory must identify the test method and assessment system when reporting the findings.
Two common assessment categories are:
Color change: The laboratory compares the specimen’s appearance before and after testing. This assessment helps identify fading, discoloration, or other changes to the original shade.
Color staining: The laboratory examines an adjacent material, such as a rubbing cloth or multifiber fabric, for transferred color.
Many rubbing and perspiration methods use grey scales to evaluate color change or staining. These scales provide standardized visual references for comparing the degree of change.
Light fastness methods may use Blue Wool reference fabrics instead. These references help assess how the specimen responds to artificial light exposure.
The rating systems serve different purposes. A rubbing fastness result cannot be directly compared with a light fastness result, even if both reports use numerical ratings.
There is also no single pass/fail score that applies to every footwear material. Acceptance requirements depend on the product category, material, buyer specification, and applicable test method.
A useful test report should identify the method, specimen, exposure condition, assessment system, and result. Manufacturers can then use the information to support material approval and product quality decisions. For more information about documenting inspection findings, see FUYU’s footwear inspection report guide.
What Factors Affect Footwear Color Fastness?
Color stability depends on the material and the conditions it encounters. Several factors can influence the result.
Material type and surface structure: Leather, textiles, coated synthetics, and molded polymer components have different surface characteristics. These differences affect how each material responds to rubbing, moisture, and light.
Dye, pigment, or colorant system: The coloring system influences how a material retains its shade and responds to different exposure conditions. Manufacturers should evaluate the finished material rather than assume that all materials with the same base composition behave alike.
Surface coatings and finishes: Coatings and surface treatments can affect color transfer and appearance during rubbing. Testing should reflect the finished material where the final surface is relevant to product performance.
Processing and finishing consistency: Differences in material processing or finishing may lead to variations between batches. Consistent material preparation supports more predictable quality.
Contact with moisture: Water and perspiration may cause color migration in susceptible materials. The effect depends on the material and the exposure conditions.
Rubbing conditions: Contact force, rubbing material, moisture, and movement influence the amount of color transferred during a test.
Light and environmental exposure: Light intensity, exposure duration, temperature, and humidity can influence fading. The selected test method defines the conditions used for evaluation.
Storage and packaging: Materials may experience contact with other surfaces or environmental conditions during storage and transportation. These factors should be considered when investigating color changes or transfer observed before products reach customers.
Different materials may require different test methods. A textile lining, leather upper, coated synthetic material, and molded EVA component should not automatically follow identical testing procedures.
Color Fastness Testing for Different Footwear Materials
Color fastness testing applies to many footwear materials, but the appropriate method depends on the component and its expected exposure.
Leather uppers and linings: Rubbing, perspiration, and water-related tests can help evaluate color transfer and staining. The selection depends on the leather finish and intended application.
Textile uppers and linings: Rubbing and light fastness tests can help assess color retention and transfer. ISO 105-B02 may be relevant to textile components when the applicable specification calls for it.
Synthetic and coated materials: These materials may require rubbing tests that assess both color transfer and surface damage. The coating or finish can influence the result.
Colored plastic components: SATRA TM8 and other suitable methods can evaluate color transfer or surface appearance during rubbing, depending on the material and test objective.
EVA and PVC footwear components: Colored EVA and PVC materials can vary in formulation, surface structure, and finish. Their color fastness should be evaluated using methods appropriate to the finished component rather than inferred from the material name alone.
For manufacturers of EVA slippers, EVA sandals, garden shoes, and PVC slippers, color stability is one consideration in material selection and product quality. FUYU Footwear, established in 2007 in Jinjiang, Fujian, provides OEM and ODM footwear manufacturing services. Its product development and production considerations include material selection, product appearance, and quality requirements for different footwear applications.
Learn more about FUYU’s EVA sole material and EVA material shoes.
Frequently Asked Questions
1. What does color fastness mean?
Color fastness describes a material’s ability to retain its original color or resist color transfer when exposed to conditions such as rubbing, light, water, or perspiration. Different tests evaluate different types of exposure.
2. What is a crocking test in footwear?
A crocking test evaluates how much color transfers from a footwear material to a rubbing cloth or pad during controlled dry or wet rubbing. SATRA TM167 is one example of a crockmeter-based rubbing test.
3. How is color fastness to light tested?
A light fastness test exposes a specimen to artificial light, often from a xenon arc lamp. The laboratory assesses color change after exposure, using reference materials such as Blue Wool fabrics where required by the method.
4. What is the difference between color change and color staining?
Color change describes a difference in the tested material’s original shade after exposure. Color staining describes color transferred from the specimen onto another material during testing.
5. What standard is used for footwear color fastness to rubbing?
ISO 17700:2019 is a footwear-specific standard for rubbing fastness and color bleeding in uppers, linings, and insocks. SATRA TM8, TM167, and TM173 provide additional rubbing test methods with different test configurations.
6. Does ISO 17700 test color fastness to light?
No. ISO 17700:2019 covers color transfer during dry or wet rubbing and the likelihood of color bleeding. ISO 105-B02:2014 addresses color fastness to artificial light for textiles.
7. How is color fastness to perspiration tested?
A perspiration test exposes a material to an artificial perspiration solution under specified conditions. SATRA TM335, for example, uses acid or alkaline perspiration solutions and a multifiber fabric to assess color change and staining.
8. Are the same color fastness tests suitable for every footwear material?
No. Test selection depends on the material, component, expected exposure, and buyer requirements. A textile lining, leather upper, coated synthetic material, and molded polymer component may require different test methods.
Conclusion
Footwear color fastness testing helps manufacturers evaluate color retention and color transfer under controlled rubbing, light, water, and perspiration conditions. ISO 17700 provides footwear-specific methods for rubbing and bleeding, while ISO 105-B02 and SATRA methods address other exposure conditions and material requirements.
The key is to select a test that matches the material and the quality concern. By distinguishing color change from staining and choosing the appropriate method, manufacturers can make more informed material selection and quality control decisions.
